![]() ![]() Nevertheless, the following rules should be observed when handling Al electrolytic capacitors:Īny escaping electrolyte should not come into contact with eyes or skin. However, the amount of dangerous materials used in our products has been limited to an absolute minimum. However, in exceptional cases, such materials must be used in order to achieve specific physical and electrical properties because no safe substitute materials are currently known. They contain flame-retarding substances which will quickly extinguish any flame that may have been ignited.Īs far as possible, EPCOS does not use any dangerous chemicals or compounds to produce operating electrolytes. įurthermore, part of the high-voltage electrolytes used by EPCOS are self-extinguishing. dimethyl formamide DMF or dimethyl acetamide DMAC. They do not contain any solvents that are detrimental to health, e.g. Personal safety The electrolytes used by EPCOS have not only been optimized with a view to the intended application, but also with regard to health and environmental compatibility. Impedance Z versus frequency f Typical behavior at 20 ☌ Rated voltage VR Surge voltage VS Rated capacitance CR Capacitance toleranceĨ5 ☌ VR IAC,R 40 ☌ VR IAC,R Voltage endurance test 85 ☌ VRĭisplacement amplitude mm, frequency range 10 55 Hz,Īcceleration max. Specifications and characteristics in brief Please read Cautions and warnings and Important notes at the end of this document. *This information is for general informational purposes only, we will not be liable for any loss or damage caused by the above information.EPCOS AG Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited.Ĭapacitors with screw terminals Standard 85 ☌Īpplications Uninterruptible power supplies Frequency convertersįeatures All-welded construction ensures reliable electrical contact Self-extinguishing electrolyte RoHS-compatibleĬonstruction Charge-discharge proof, polar Aluminum case with insulating sleeve Poles with screw terminal connections Mounting with ring clips, clamps or threaded stud The bases of types with threaded stud and d mm are not insulated ![]() Today, EPCOS operates as TDK Electronics and continues to provide a wide range of electronic components and solutions for use in a variety of applications. In 2009, EPCOS became a subsidiary of TDK Corporation, a multinational electronics company based in Japan. The company was founded in 1919 and had its headquarters in Munich, Germany.ĮPCOS was known for its high-quality products and innovative solutions, and it had a strong reputation in the electronics industry. EPCOS AG (now TDK Electronics AG) was a German company that specialized in the design and manufacture of electronic components, including capacitors, inductors, and EMI filters. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |